Kenwood TK-5410 Manuel d'utilisateur télécharger pdf (Page 47)

SCRAMBLER (FM) <TK-5210/ TK-5310 ONLY>/

ENCRYPTION (P25)

Note:

◆ The Scrambler function can be used only in Conventional FM

Operation. Additionally, the Voice Scrambler board must be

installed before this function can be activated.

◆ Ask your dealer for details concerning the Voice Scrambler

board and the Encryption DES/AES settings.

Secure (encrypted) trAnSmiSSion

Press the key programmed as Scrambler/ Encryption to

switch the transceiver to secure (encrypted) transmission.

• On K2/K3/K5/K6/K7 model transceivers, the icon appears when

the Scrambler or Encryption function is turned ON.

• Pressing the

PTT switch after the Scrambler or Encryption function

has been turned ON encrypts the transmitted signal.

• Each group member must activate their respective Scrambler/

Encryption functions to descramble the received signals.

Selecting the ScrAmBler code

1 Press the key programmed as Scrambler/ Encryption

Code (K2/K3/K5/K6/K7 models only) or press and hold the

key programmed as Scrambler/ Encryption for 1 second,

to enter Code Selection Mode.

2 Press the Side 2 and Side 3 keys or the D> and <C keys to

increase or decrease the Scrambler code.

• There are 16 available Scrambler codes (1 ~ 16).

• Each group member must use the same code in order for the

transceivers to descramble the received signals.

3 Press the Side 1 key to set the new Scrambler code.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 65 66

Pas de commentaire

Kenwood TK-5410 Manuel d'utilisateur Page 47