Kenwood TS-850S Manuel d'utilisateur télécharger pdf (Page 23)

4-4. CW OPERATION

AlP switch

When switched on, it

reduces interference from

strong signals.

FULL/SEMI switch

During CW operation, selects

either Full Break-in (FULL) or

Semi Break-in (SEMI).

VOX/MAN switch

Used to select Break-in

operation.

PLAY, REC keys

Records and plays CW

messages for transmission.

THRU/AUTO switch

THRU; Antenna tuner is off.

AUTO: Antenna tuner is on.

AGC switch

Set to MID

normally.

KEY SPEED control

This control the speed of the

electronic keyer.

PITCH key

Select the CW receive tone

(RECEIVING)

pT| Turn on the DC power supply and then turn the transceiver’s power switch ON.

|~2] A frequency is shown in the display.

Press the UP/DOWN switches to select the desired frequency band.

When the 1 MHz step position is selected, the MHz indicator will light.

[4] Select CW with the MODE key.

[~^ Turn the AF gain control clockwise until a signal or noise is heard.

Rotate the TUNING knob and select an open channel.

(Tl

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 84 85

Pas de commentaire

Kenwood TS-850S Manuel d'utilisateur Page 23