Kenwood TK-3501E Manuel d'utilisateur télécharger pdf (Page 12)

CHARGING THE BATTERY PACK

The battery pack is not charged at the factory; charge it before

use.

ATTENTION: Always switch OFF a transceiver equipped with a

battery pack before inserting the transceiver into the charger.

1 Plug the AC adapter cable into

the jack located on the rear of

the charger.

2 Plug the AC adapter into an AC

outlet.

3 Slide a battery pack or a

transceiver equipped with a

battery pack into the charging

slot of the charger.

• Make sure the metal contacts of

the battery pack mate securely

with the charger terminals.

• The indicator lights red and

charging begins.

4 When charging is completed,

the indicator lights green.

Remove the battery pack or the

transceiver from the charging

slot of the charger.

• It takes approximately 3 hours to

charge the battery pack.

• When the charger will not be

used for a long time, unplug the

AC adapter from the AC outlet.

Charging slot

Indicator

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 30 31

Pas de commentaire

Kenwood TK-3501E Manuel d'utilisateur Page 12