Kenwood TS-590S Manuel d'utilisateur Page 3

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 28
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 2
3
1. Relevant Models
This user guide is for the TS-590S.
Using the TS-590S and KENWOOD NETWORK COMMAND SYSTEM (hereinafter called
"KNS") enables transceiver operations by remote control using a domestic LAN or the
internet. (See Note.)
KNS is a system configured using PCs, network environments, ARCP-590 (a Radio
Control Program) (hereinafter called "ARCP-590”), and ARHP-590 (a Radio Host
Program) (hereinafter called “ARHP-590”) for remote control of the TS-590S.
Note: To transmit and receive audio, separate VoIP software is required.
Important
¾ To configure the system, knowledge not only of transceivers but also of PCs and
networks is required. Kenwood does not offer support for customer computers and
Networks. Furthermore, for operations relating to actual transmitting, note that
procedures according to the Radio Act are also required.
¾ Operations via networks may be delayed due to unavoidable principles.
Consequently, do not perform operations (such as contests or pile-ups requiring
quick responses) for which delays are likely to be a problem.
¾ Refer to Chapter 5 for other limitations.
¾ Kenwood Corporation shall bear no responsibility for related damage such as
damage caused by missed communications and dialog opportunities due to
incorrect customer settings, nonconformances, or misoperations as a result of
using this document or the ARCP-590 or ARHP-590 software.
2. Objectives of this document
To supply information to configure a remote control system via an internal LAN or internet
using the TS-590S ARCP-590 and ARHP-590.
The following describes the main elements.
Via Internet Internal LAN
Programs Used
ARCP-590 (Operates
transceiver remotely.)
ARHP-590 (Operates via the
ARCP-590 and transceiver.)
VoIP software (transmits and
receives audio)
ARCP-590 (Operates
transceiver remotely.)
ARHP-590 (Performs
operations via the ARCP-590
and transceiver.
VoIP software (transmits and
receives audio)
Network
Connections via the internet
(To use the internet, a contract
with a provider is necessary.
Connection using internal LAN
IP address used
Global IP address Local IP address
Application based
on the Radio Act
Application using the internet Application using internal LAN
Vue de la page 2
1 2 3 4 5 6 7 8 ... 27 28

Commentaires sur ces manuels

Pas de commentaire