Kenwood TH-55AT Series Manuel d'utilisateur télécharger pdf (Page 10)

DTMF PAD (with the TH-25AT/45AT/55AT)

This key pad is used in conjunction with a repeater to

provide AUTOPATCH capabilities.

M (Memory) key

This key is used to enter a frequency, offset, etc. into

the desired Memory channel..

When this key is pressed during Memory channel

operation the contents of the Memory channel are

duplicated in the VFO, and the transceiver returnes to

VFO operation.

The contents of the memory are not lost during this

procedure.

(0)

CTCSS key

This key is used to select the CTCSS (Tone squelch)

function.

SHIFT key

This key is used to select the desired transmitter offset

for repeater operation. When the offset function is ON,

or will be displayed in the display.

REV key

Pressing the REV key allows you to reverse the

transmit/receive frequencies during repeater opera

tions. This will allow you to check the input of the

repeater or to operate on a reverse repeater pair.

HI-LO switch

This switch is used to select the transmit output

power.

TH-25A/45A SERIES

TH-55AT SERIES

HI LO

LO HI

RIT control (TH-55AT/55E only)

When the transmit frequency of the distant station

drifts a little bit during the QSO, but you do not wish to

alter your transmit frequency to compensate, you may

wish to make use of the RIT control function. This con

trol allows shifting the receive frequency apploximate-

ly ±5 kHz without shifting the transmit frequency.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 22 23

Pas de commentaire

Kenwood TH-55AT Series Manuel d'utilisateur Page 10