Kenwood TK-3202 Manuel d'utilisateur télécharger pdf (Page 12)

INSTALLING THE ANTENNA

Screw the antenna into the connector

on the top of the transceiver by

holding the antenna at its base and

turning it clockwise until secure.

Note: The antenna is neither a handle,

a key ring retainer, nor a speaker/

microphone attachment point. Using the

antenna in these ways may damage the

antenna and degrade your transceiver’s

performance.

Antenna

INSTALLING THE BELT CLIP

If necessary, attach the belt clip using

the two supplied 3 x 8 mm screws.

Note: If the belt clip is not installed, its

mounting location may get hot during

continuous transmission or when left

sitting in a hot environment.

Belt

clip

Do not use glue which is designed to prevent screw loosening when

installing the belt clip, as it may cause damage to the transceiver.

Acrylic ester, which is contained in these glues, may crack the

transceiver’s back panel.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 26 27

Pas de commentaire

Kenwood TK-3202 Manuel d'utilisateur Page 12