Kenwood KDC-7021SE EN Manuel d'utilisateur télécharger pdf (Page 32)

English

— 32 —

Make sure that the unit is installed securely in place. If the unit is

unstable, it may malfunction (eg, the sound may skip).

Bend the tabs of the

mounting sleeve

with a screwdriver or

similar utensil and

attach it in place.

Metal mounting

strap

(commercially

available)

Self-tapping

screw

(commercially

available)

Firewall or metal support

Screw (M4X8)

(commercially

available)

To attach this unit, make sure the front of the control panel faces you

and fit it into the mounting sleeve by pressing the four corners of the

hard rubber frame at the same time.

Do not apply strong pressure to other sections than the corners;

otherwise troubles such as the impossibility of opening or closing the

panel may result.

Connecting Cables to Terminals Installtion

Connecting the ISO Connector (see p.31)

The pin arrangement for the ISO connectors depends on the type

of vehicle you drive. Make sure to make the proper connections to

prevent damage to the unit.

The default connection for the wiring harness is described in 1

below. If the ISO connector pins are set as described in 2 or 3,

make the connection as illustrated.

2WARNING

Unit Vehicle

Ignition wire (Red)

Battery wire (Yellow)

A–7 Pin (Red)

A–4 Pin (Yellow)

Unit Vehicle

Ignition wire (Red)

Battery wire (Yellow)

A–7 Pin (Red)

A–4 Pin (Yellow)

1 (Default setting) The A-7 pin (red) of the vehicle's ISO

connector is linked with the ignition, and the A-4 pin (yellow)

is connected to the constant power supply.

2 The A-7 pin (red) of the vehicle's ISO connector is connected

to the constant power supply, and the A-4 pin (yellow) is

linked to the ignition.

Unit Vehicle

Ignition wire (Red)

Battery wire (Yellow)

3 The A-4 pin (yellow) of the vehicle's ISO connector is not

connected to anything, whilst the A-7 pin (red) is connected to

the constant power supply (or both the A-7 (red) and A-4

(yellow) pins are connected to the constant power supply).

Connect to a power source

that can be turned on and

off with the ignition key.

KDC-7021SE_U.S 02.11.24 6:58 PM Page 32

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 38

Commentaires sur ces manuels

Pas de commentaire

Kenwood KDC-7021SE EN Manuel d'utilisateur Page 32

Commentaires sur ces manuels

Produits connexes et manuels pour Autoradio Kenwood KDC-7021SE EN