Kenwood th-k20a Manuel d'utilisateur télécharger pdf (Page 61)

MICROPHONE PF KEYS

There are 3 microphone PF (Programmable Function) keys: [PF1], [PF2], and

[PF3]. You can assign your desired functions to these 3 keys.

1 Enter Menu mode and access Menu No. 24 (PF 1) and/or Menu No. 25 (PF 2)

and/or Menu No. 26 (PF 3), then press [F].

2 Rotate the ENC control to select your desired function for the key, then press

[F] to store the setting.

Programmable functions available are:

VFO/ MR/ CALL/ UP/DOWN/ TONE/ T.SEL/ SHIFT/ REV/ 1750/ WX <TH-

K20A K type only>/ N.FM/ PR.SCAN (Priority scan)/ M.DISP (Memory display

type)/ SQL/ LOW/ STEP/ L.OUT (Memory channel lockout)/ MONI/ LAMP

3 Press [MENU] or [PTT] to exit Menu mode.

MICROPHONE KEY LOCK

The Microphone Key Lock function will lock the microphone PF keys.

1 Enter Menu mode and access Menu No. 27 (MIC.LK), then press [F].

2 Rotate the ENC control to select “ON”, then press [F] to store the setting.

3 Press [MENU] or [PTT] to exit Menu mode.

BATTERY TYPE

Set the battery type to match the type of batteries you are using in the transceiver.

If the battery type is not set properly, the battery indicator will not display the

correct battery power while transmitting.

1 Enter Menu mode and access Menu No. 34 (BATT), then press [F].

2 Rotate the ENC control to select the Battery Type to “LI-ION” (Lithium ion

battery) or “ALKALI” (Alkaline dry battery), then press [F] to store the setting.

3 Press [MENU] or [PTT] to exit Menu mode.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 67 68

Pas de commentaire

Kenwood th-k20a Manuel d'utilisateur Page 61