Kenwood TK-2202L Manuel d'utilisateur télécharger pdf (Page 21)

BASIC OPERATIONS

1 Turn the Power switch/ Volume

control clockwise to switch the

transceiver power ON.

•A beep sounds if enabled by

your dealer.

2 Press the key programmed with

the Monitor or Squelch Off

function to hear background

noise, then rotate the Power

switch/ Volume control to adjust

the volume.

3 Rotate the Channel selector to

select your desired channel.

• When you receive an

appropriate signal, you will

hear audio from the speaker.

4 To make a call, press and hold

the PTT switch, then speak into

the microphone using your normal

speaking voice.

• Hold the microphone

approximately 1.5 inches

(3 to 4 cm) from your lips.

5 Release the PTT switch to

receive.

Note: When the battery pack voltage

becomes too low, transmission will stop

and an alert tone will sound. See “Low

Battery Warning” on page 23.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 31 32

Pas de commentaire

Kenwood TK-2202L Manuel d'utilisateur Page 21