Kenwood TM-V71E Manuel d'utilisateur télécharger pdf (Page 76)

S-METER SQUELCH

S-meter Squelch causes the squelch to open only when a signal with the same or

greater strength than the S-meter setting is received. This function relieves you

from constantly resetting the squelch when receiving weak stations that you have

no interest in.

1 Enter Menu mode and access Menu 105 (S.SQL) {page 20}.

2 Set the S-Meter squelch to ON or OFF.

3 To select the desired S-meter setting, rotate the left (band A) or right (band B)

SQL control depending on which band you have selected.

• The squelch will open only at the level you have selected (for example, level 9).

n Squelch Hang Time

When using S-meter Squelch, you may want to adjust the time interval

between when the received signals drop and when the squelch closes.

1 Enter Menu mode and access Menu 106 (S.SQ.HNG) {page 20}.

2 Set the hang time to 125, 250, or 500 ms, or OFF.

ADVANCED INTERCEPT POINT (AIP)

The VHF/UHF band is often crowded in urban areas. AIP helps eliminate

interference and reduce audio distortion caused by intermodulation. You can use

this function only while operating on the VHF/UHF band.

1 Enter Menu mode and access Menu 103 (VHF.AIP) and/or Menu 104

(UHF.AIP) {page 20}.

2 Set the AIP to ON or OFF.

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 106 107

Pas de commentaire

Kenwood TM-V71E Manuel d'utilisateur Page 76