Kenwood UD-900M Manuel d'utilisateur télécharger pdf (Page 57)

Recording operation on cassette deck (Deck B only)

The cassette deck incorporates the Dolby HX Pro

headroom extension function and auto-bias function

to provided a recording with superior high-frequency

characteristics.

CRLS keys Deck B Eject keys

■ Ordinary recording

Set up the cassette deck.

0 Insert a tape in deck B.

® Set the tape transport

direction.

® Select one-side or two-side recording.

ZD :Two-stde recording

in :One-side recording

(4) Select the Dolby NR mode.

When the microphone is not to be used, be sure to set

the MIC MIXING control fully counterclockwise.

2 Select the source to be recorded.

Press repeatedly.

Select a music source other than TAPE.

To apply the equalizer effect

Refer to page 60.

When recording tapes for playing in a car stereo or

headphone stereo, select CAR AUDIO or HP STEREO.

(See page 37.)

3 Activate the auto-bias setting.

The optimum bias is set in about 45 seconds, after

which the deck enters the stop mode.

To cancel the auto-bias adjustment operation in the

middle, press the Stop key.

Recording is possible even when the auto-bias setting

is omitted.

^ Set the recording level.

® Play a music source.

@ Press the CRLS key.

ü-

- Lights up.

Level adjustment completes

in about 20 seconds.

Wait until the indicator lights

steadily.

• The deck enters the record-pause mode.

» If you press the Record key while the indicator is blink

ing, the recorded sound may distort.

When the|CRLS|key is pressed while the indicator is

blinking, the level adjustment is terminated at that mo

ment and the deck enters the record-pause mode.

» The recording level setting is suspended if the sound of

source is not input within about 5 second after the

CRLSi key has been pressed.

Start recording.

® Play the music source from the beginning.

® Press the a key. ^

I “ I * Press once.

Recording will start.

The deck enters the stop mode automatically when the

tape has been recorded till the end.

Auto-bias function

The tapes categorized as "normal"or"chrome" tape vary widely

in the characteristics from popular to high-class types. There

fore, this system is equipped with the auto-bias adjustment

function for exclusive use with normal or chrome tapes so that

optimum recording can always be obtained with any types of

normal or chrome tapes. It is recommended to use the auto

bias function when using a normal or chrome tape.

During auto-bias adjustment, the keys are defeated except

for the [^, and H keys of Deck A and HI key of Deck B.

If the amount of remaining tape is small, the auto-bias adjust

ment may be canceled in the middle and tape stopped at that

position.

The auto-bias level is canceled when the |EJECT [key of Deck

B is pressed.

UD-900/UD-900M (En) 57

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 83 84

Commentaires sur ces manuels

Pas de commentaire

Kenwood UD-900M Manuel d'utilisateur Page 57

Commentaires sur ces manuels

Produits connexes et manuels pour Acoustique Kenwood UD-900M