Kenwood UD-900M Manuel d'utilisateur télécharger pdf (Page 82)

Specifications (For U.S.A. and Canada)

Pre Amplifier / Tuner unit (C-A9)

FM Tuner section!

Tuning frequency range

................

87.5 MHz - 108 MHz

Sensitivity (IHF)

.......................

12.8 dBf (1.2 |xV at 75 Q)

Total harmonic distortion at 1 kHz

MONO................................................................. 0.5%

STEREO...............................................................0.6 %

Signal to noise ratio at 1 kHz

MONO..................................

.....

80 dB (85 dBf input}

STEREO.....................

..............

74 dB (85 dBf input)

Selectivity (IHF ± 400 kHz)

.......................................

50 dB

Stereo separation (IHF at 1 kHz)

............

.............

40 dB

Frequency response... 30 Hz ~ 15 kHz + 0.5 dB, - 3 dB

AM Tuner section~1

Tuning frequency range

.................

530 kHz ~ 1,700 kHz

Usable sensitivity

........................

10 ]aV / (500 [iV / m)

Signal to noise ratio.....................................

...........

48 dB

Pre Amplifier section |

Rated output voltage (PRE OUT)

................................

1.0 V (40 Hz - 20 kHz, 0.02 %)

Total harmonic distortion

.............................................0.02 % (40 Hz - 20 kHz)

.....................................

.....................

0.01 % (1 kHz)

Signal to noise ratio... 90 dB (IHF'66) / 85 dB (IHF'78)

Input sensitivity / Impedance

MD / DAT, LD / AUX, VIDEO

............

200 mV / 47 kQ

MIC

....................

................................1.2 mV/47 kQ

Loudness control

VOLUME at -30 dB level

...................

+ 6 dB (100 Hz)

N.B. circuit (- 30 dB Volume level).......................+ 12 dB

(at 60 Hz)

Output level / Impedance

MD / DAT, VIDEO

............

...............

200 mV / 2.2 kQ.

Graphic equalizer

Individual channel

................

60 Hz, 150 Hz, 400 Hz,

1 kHz, 2.5 kHz, 6 kHz, 15 kHz

VIDEO section]

Input level / Impedance

VIDEO (composite)...............................1 Vp-p / 75 Q

Input (LD / AUX,VIDEO IN)

Output level / Impedance

VIDEO (composite)

..........................

1 Vp-p / 75

Output (MONITOR OUT,VIDEO OUT)

[General]

Dimensions

................

..............

W: 270 mm (10-5 / 8")

H: 85 mm (3-3 / 8")

D: 318 mm (12-1 /2")

Weight (net).............

.................

................

3.1 kg (6.8 lb)

Power Amplifier unit (B-A9)

Rated power output

35 watts per channel minimum RMS, both chan

nels driven, at 4 n from 40 Hz to 20 kHz with no

more than 0.06 % total harmonic distortion

Presence 1 kHz at 8

...............................

20 W + 20 W

Total harmonic distortion

........................

0.06 % (40 Hz - 20 kHz, 35 W, 4 Q)

................ 0.005 % (1 kHz, 1/2 Rated power, 4 Q)

Frequency response

.........................

40 Hz ~ 70 kHz, + 0 dB, - 1.5 dB

Signal to noise ratio

..............................

105 dB (IHF'66) / 90 dB (IHF'78)

[General]

Power consumption ........................................

.......

170 W

Dimensions.........

.........

..............

W: 270 mm (10-5 / 8")

H: 120 mm (4-3/4")

D: 317 mm (12-1/2")

Weight (net)..................

...........................

6.4 kg (14.1 lb)

Note:

KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.

For the U.S.A.

FCC WARNING

This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference

unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if

an unauthorized change or modification is made.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment may

cause harmful interference to radio communications, if it is not installed and used in accordance with the instructions. Fiowever, there is

no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interfer

ence by one or more of the following measures:

- - Reorient or relocate the receiving anténna.

- - Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- - Consult the dealer or an experienced radio / TV technician for help.

82uD-900/UD-9D0M (En)

1 2 ... 77 78 79 80 81 82 83 84

Commentaires sur ces manuels

Pas de commentaire

Kenwood UD-900M Manuel d'utilisateur Page 82

Commentaires sur ces manuels

Produits connexes et manuels pour Acoustique Kenwood UD-900M