Kenwood UD-900M Manuel d'utilisateur télécharger pdf (Page 64)

Recording of CD playback (OCRS)

■ Al EDIT recording

When the total playing time of a CD exceeds the re

cording time of tape, this function allows to accom

modate all tracks in a tape by cutting the end of each

track by means of fade-out. It is also possible to

specify the important tracks that must not be cut.

(Al PRIORITY EDIT (UD-900 only})

To apply an equalizer effect See page 60.

2 Select the CD input.

Set up Deck B ready for recording.

port direction.

be recorded.

□iRECTi^ ^ :Select two-side recording.

Í rfm~ )

® Select the Dolby NR mode.

Insert the disc in the CD player.

• With the UD-900M system, close the door and make

sure the! PGM| indicator is extinguished.

Select the tracks which must not be cut in

recording.

UD-900 only:

• |PGM [lights up.

@ Input the track Nos. using the numeric keys.

• Input several numbers in a desired order.

• For details, refer to "Playing desired tracks in desired or

der" on page 50.

Select the Al EDIT mode with the EDIT

MODE key of the CD player.

EDIT MODE

P» EDIT ^ I Al EDIT! -» MULTI EDIT -,

The display changes every tinne

the key is pressed.

Proceed to the next step within 8 seconds after setting

Al EDIT. If 8 seconds have elapsed, select the Al EDIT

mode again.

With the UD-900M (DP-MA9) system, press the disc

selector key to select the disc to be recorded.

Input the two-way recording time of the

tape.

Use the numeric keys of the CD player.

C-30 tape: f+io] i+i^ Fmo] 0

C-46 tape: FmqI Fmo] FmoI Fm^ (D

• 46, 54, 60 or 90 can also be selected every time the

[TlM^ key is pressed. In this case, press thejEDIT MODE[

key again to establish the input.

• Tracks are edited automatically to fit sides A and B, and

the end of editing is indicated when thejAl EDlTjindica-

tor changes from blinking to continuous lighting.

7 Press the CCRS key.

Normal-speed recording

Quick blinking Slow blinking

Double-speed recording

[ OCRS HIGH I

Slow blinking

Recording occurs as shown below.(example for

the UD-900 system)

k- Programmed tracks —4

1 '' IL_!.JI

< H |< G |< F 1 <3

First, the programmed tracks are recorded without any

cutting, the other tracks are recorded with the end of

every track cut by fade-out. (UD-900 only)

If the tape has enough recording time, all tracks are

recorded until the end.

The CD player and cassette deck enter the stop mode

automatically after the completion of recording.

Notes:

1. If an extremely-short tape recording time is set, automatic editing may not occur.

2. ThejSPACElkey and|REPEAT|key functions are inoperative.

3. Edit operation does not occur if a track No. 44 or more has been programmed. (With the UD-900M system, programming is not possible.)

4. X. FADE recording is not possible.

64 UD-900/UD-900M (En)

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 83 84

Commentaires sur ces manuels

Pas de commentaire

Kenwood UD-900M Manuel d'utilisateur Page 64

Commentaires sur ces manuels

Produits connexes et manuels pour Acoustique Kenwood UD-900M