Kenwood VR-5080 Manuel d'utilisateur télécharger pdf (Page 42)

Chapter Two : Setting Up the Remote Control Unit

Remote Setup

Before you can begin using the receiver to control your home

entertainment system, you must set up Remote Control unit

to operate your speakers effectively. There are four areas of

speaker setup:

• Selecting the Speakers

• Balancing the Speaker Volumes

• Bass Peak Level

• Adjusting the Speaker Distances

The receiver must be on and speakers must be connected

before you can set up speakers.

Setting Up Speakers

Selecting the Speakers

1. Press the POWER ON/STANDBY button on the main

unit to turn the power on.

2. Press the MUSIC button or MOVIE button to display

the “Menu”.

REC

Surround SetUp

Sub Woofer = On

Home Next

REC

01.IR

02.Surround

03.Contrast

Home Enter

3. Press the Menu button (LCD function button 2).

4. Press the Setup button (LCD function button 2).

5. Press the LCD cursor up/down button (

, ) to se-

lect “02. Surround”, then press the Enter button (LCD

function button 2)

6. Press the LCD cursor up/down button (

, ) to se-

lect Sub Woofer On or Off, then press the Next button

(LCD function button 2).

• If you selected On for the subwoofer, all of the bass

below 80Hz is removed from all other Nml (Normal)/

THX setting speakers in your system and is sent to

the subwoofer in all listening modes. This improves

your speakers’ power handling and reduces overall dis-

tortion.

• If you selected Off for the subwoofer, the bass tone

is removed from all other Nml/THX setting speakers

in your system and is sent to the front L and R speakers.

To abort setup, press the MUSIC button, MOVIE but-

ton or Home button.

Select Nml/THX for the speaker for use in THX re-

production.

7. When the front (left and right) speaker setting menu

(Front) appears, select Front Nml (Normal)/THX or

Large in the same way as step 6, then press the Next

button. (If you set the subwoofer to Off in step 6, skip

this step.)

Tuner

FM 01ch Auto

87.50MHz

REC

Home Setup

FL FR

SL SR

SBL SBR

Speaker Placement

An example of installation is shown here.

Use this figure as a reference for installing the system ac-

cording to the types of your speakers and conditions of your

listening room.

FL/FR (Front speakers) : Place to the front left and right

of the listening position. Front speakers are required for all

surround modes.

C (Center speaker) : Place front and center. This speaker

stabilizes the sound image and helps recreate sound mo-

tion.

SW (Subwoofer) : Reproduces powerful deep bass sounds.

SL/SR (Surround speakers) : Place to the direct left and

right, or slightly behind, the listening position at even

heights, at least 3.3 ft (1 meter) above the ears of the listeners.

SBL/SBR (Surround back speakers) : The SBL/SBR

speakers are required to reproduce 6.1-channel signals

(THX Surround EX, DTS-ES). Place them on the left and

right behind the listening position and at the same height

as the SL/SR speakers.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 59 60

Commentaires sur ces manuels

Pas de commentaire

Kenwood VR-5080 Manuel d'utilisateur Page 42

Commentaires sur ces manuels

Produits connexes et manuels pour DVR de voiture Kenwood VR-5080